Strack Norma will be showcasing its new products for injection moulding and die casting tools and its range of products for the tool- and mould-making industry.
The new flat centerings Z500 and Z501 ensure a precise mould centering. They can be screwed on the outside of the mould and thus increase the active range of the constructing engineer in the tool. Available in six dimensions and in a narrow design, they maintain the plate stability and can easily be dismounted even with closed tools. The new, compact slide holding devices Z5140-3-250 and Z5140-4-250 expand the proven series Z5140. Its roof-shaped holding surface is fixed transversely so that it makes it possible to secure especially long and narrow sliders even in minimal space. It guarantees a high holding force and enables a safe operation of the slide tool.
System compression springs of Strack Norma are made of a flat-round profile wire of spring steel. Here they are wrapped in such a way that they react to pressure. Due to their versatile application, system compression springs are used among other things in the punching- and forming technology, in the injection moulding- and die cast tool construction and in the machine- and jig construction.
Strack Norma expands its range of springs with the variant SN2521, which is ideally suited for lower loads. Each load type is assigned its own colour label, which not only serves to distinguish quickly but also excludes confusion. Depending on the requirement a specific type of spring is used.
Boosting Efficiency in Injection Moulding and Die Casting Tools
At the K 2019 Strack Norma will also present a new DLC-coated version of the ejector ping Z98. Thanks to the coating it provides for better dry emergency running properties and thus increases the service life of the tool and the productivity. The DLC-coating has a thickness of about 2 μm and a hardness of approximately 3.000 HV at friction value of 0,1-0,15.
This article was first published by ETMM.
By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy.
Naturally, we always handle your personal data responsibly. Any personal data we receive from you is processed in accordance with applicable data protection legislation. For detailed information please see our privacy policy.
I consent to NürnbergMesse GmbH, Exhibition Centre, 90471 Nuremberg, including any affiliated companies according to §§ 15 et seq. AktG (hereafter: NürnbergMesse) and Vogel Communication Group GmbH & Co. KG, Max-Planckstr. 7-9, 97082 Würzburg, including any affiliated companies according to §§ 15 et seq. AktG (hereafter: Vogel Communications Group) using my e-mail address to send editorial newsletters. I have accessed lists of the respective companies here for Vogel Communications Group
Newsletter content may include all products and services of any companies mentioned above, including for example specialist journals and books, events and fairs as well as event-related products and services, print and digital media offers and services such as additional (editorial) newsletters, raffles, lead campaigns, market research both online and offline, specialist webportals and e-learning offers. In case my personal telephone number has also been collected, it may be used for offers of aforementioned products, for services of the companies mentioned above, and market research purposes.
In case I access protected data on Internet portals of NürnbergMesse including any affiliated companies according to §§ 15 et seq. AktG or Vogel Communications Group including any affiliated companies according to §§ 15 et seq. AktG, I need to provide further data in order to register for the access of such content. In return for this free access to editorial content, my data may be used in accordance with this consent for the purposes stated here.
I understand that I can revoke my consent at will. My revocation does not change the lawfulness of data processing that was conducted based on my consent leading up to my revocation. To declare my revocation I must use this contact form. In case I no longer wish to receive certain newsletters I have subscribed to, I can also click on the unsubscribe link included at the end of a newsletter. Further information regarding my right of revocation and the implementation of it as well as the consequences of my revocation can be found in the privacy policy, section editorial newsletter.
Fraunhofer IFAM Expands Range of Services and Expertise for Applied Research
Cookie-Manager Imprint Media General Terms & Conditions Privacy Help
Copyright © 2022 Vogel Communications Group
This portal is a brand of Vogel Communications Group. You will find our complete range of products and services on www.vogel.com
Pixabay; Messe Stuttgart; Fraunhofer IFAM; https://portal.handtmann.org/sites/Geschaeftsbereiche/Konzern/Holding/Marketing/Logo/Forms/Thumbnails.aspx?useFiltersInViewXml=1&FilterField1=FileType&FilterValue1=jpg&FilterType1=Computed&id=%2Fsites%2FGeschaeftsbereiche%2FKonzern%2FHolding%2FMarketing%2FLogo%2FLogo%20Englisch%2Ejpg&parent=%2Fsites%2FGeschaeftsbereiche%2FKonzern%2FHolding%2FMarketing%2FLogo; http://promove.ch/de/content/fondarex-sa; Strack Norma; Public Domain; gemeinfrei; GF Casting Solutions AG; BMW Group; ItalPresseGauss S.p.A.; Grenzebach; Rheinmetall AG